3D Waterproof Car Sticker Car Logo Funny Decoration

As long as you like , not round car logo can also be DIY.

Material:pvc

Applicable place:Logo modification

Features:
- 3D metal stickers.
- With special double-sided adhesive, it is more convenient to use.
- Replace without leaving traces not reflective - Extension is better, not easy to brittle broken, paste when can be clearly felt.
- Material color correction, paste after feeling very firm, more have model.

TIPS:
Use alcohol to clean and dry the installation point, tear off the adhesive paper on the back of the logo, blow the glue with the blower and stick the position on the installation position. Press firmly, the effect is very strong, and it will not damage your car.

Matters Needing Attention:
- Don't wax the sticker a week before you decide to dress up your car. The film should not be applied when the car is hot. The car must be cleaned and put on the back one.

- Do not wash your car within a week. It is recommended not to be exposed to the sun within 24 hours. Do not wash your car within three days after pasting. Do not paste on rainy days.

- If the sticker needs to be pasted on the crack of the door or other places that need to be moved, don't worry, just cut it with a sharp knife after it is pasted.

- If you really don't want to do anything, please go to the place where the solar membrane is put on and ask for help.

How to clear:
- Gently scrape the edges of the sticker with your fingernails and tear it off completely, leaving no marks or damage to the paint. In winter, if it is too cold to scrape the corners, a hair dryer can be used to tape the paper.
- Heat it up properly, and it can be easily removed after melting.

Note:
- Please allow 0.5 - 3 cm error due to the manual measure.
- Due to the difference between different monitors, the images are not the current color of the item.